THE INDEPENDENT VOICE OF MOTORCYCLE CULTURE

NEWS / RIDES / GEAR / FREEDOM

CE Level 1 vs Level 2 Motorcycle Armour: A Rider’s Guide to Impact Protection

Real motorcycle helmet and gloves

GEAR RESEARCH DESK · NOVEMBER 2026 · BUYING GUIDE (NOT A ROAD TEST)

A jacket with ‘armour included’ tells a rider very little. A more useful question is what standard the protectors meet, which level they achieved and whether they stay in position when the bike is moving.

Where CE impact protection fits

Motorcycle limb protectors commonly carry EN 1621-1 certification, while back protectors are assessed under EN 1621-2. These are not the same standards as garment abrasion testing under EN 17092. The equipment label should identify the relevant standard and performance classification.

Level 2 protectors generally have a lower permitted transmitted force under defined testing conditions than Level 1 products. That can mean more impact attenuation in the prescribed test, not immunity from injury.

Look beyond the pad’s name

A manufacturer may advertise ‘race protection’ without explaining the precise protector model or certification. Remove the insert where the product allows it and inspect its certification label. Check how the protector bends and what coverage it actually provides around the shoulder, elbow, hip, knee or back.

Coverage zones are important. A compact protector can pass a test yet still cover less body area than another style; fit and body shape influence how the piece sits inside the garment.

Try it on the motorcycle

Have someone check where elbow and shoulder protection sits when you lean forward and move your hands through the usual control range. The garment should not pull the pads away from their intended position. Similarly, knee armour should line up while your legs are on the pegs rather than only while standing straight.

If the armour is compatible with adjustable pockets, follow the maker’s fitting procedure rather than altering the protector itself.

What a published test cannot do

Certification is valuable evidence, but the standard is not a prediction for every crash. Injury risk depends on impact conditions and the rider’s body. A properly fitting Level 1 protector may be a more sensible choice than a Level 2 piece that makes a garment unwearable or sits in the wrong place.

A sensible buying checklist

  • Locate and read the EN 1621 marking and level.
  • Confirm coverage and whether the armour is included, not sold separately.
  • Verify that the garment pockets retain protectors during movement.
  • Check that back protectors cover the intended torso area without disturbing helmet movement.
  • Consider comfort and ventilation over a full day.

Sources and test disclosure

This article summarizes published standards, official guidance and product-category considerations. Biker Free Press has not independently laboratory-tested or road-tested a named product for this guide; there is no fabricated performance score or sponsored ranking.

RevZilla — CE Ratings and Protectors

MSF — Personal Protective Gear


Return to the Newsroom · Send a correction or story tip