THE INDEPENDENT VOICE OF MOTORCYCLE CULTURE

NEWS / RIDES / GEAR / FREEDOM

A Better Pre-Ride Motorcycle Inspection: The T-CLOCS Method

Real close-up photograph of a mechanic working on motorcycle engine with screwdriver

Mechanic working on a motorcycle; representative repair photograph. Photo: Shixart1985 · CC BY 2.0. Display crop applied.

No amount of mechanical confidence replaces looking at the bike before riding it. A consistent inspection is quicker to remember and harder to skip than a random glance.

T — Tires and wheels

Check cold tire pressure according to the motorcycle and tire manufacturer’s requirements, inspect tread and sidewalls for cuts, bulges, cracking or embedded debris, and look for wheel damage or loose hardware. Check that brakes respond properly before departure.

C — Controls

Move the handlebars from side to side and confirm smooth travel. Check the throttle returns freely without binding, verify clutch and brake-lever operation, and look for damaged cables, hoses or leaking fittings.

L — Lights and electrics

Test the headlamp, brake light from both controls, turn signals, horn and relevant switches. Confirm mirrors are secure and that wiring isn’t rubbing or pinched. A failed brake light can be an obvious risk on the road.

O — Oil and other fluids

Look for leaks and inspect levels according to the owner’s manual. Depending on the motorcycle, that may include engine oil, transmission or final-drive oil, brake fluid and coolant. Follow the specified temperature and orientation procedures for accurate readings.

C — Chassis

Inspect visible fasteners, suspension, frame condition and chain or belt where applicable. Unusual movement, leaking forks, missing hardware or abnormal chain tension should be resolved before a long trip.

S — Stands

Check that side or center stands deploy, retract and hold securely. Inspect springs and cut-off switches where equipped.

Make it a habit, not a ritual

The Motorcycle Safety Foundation calls this process T-CLOCS. Your motorcycle’s owner manual remains the primary guide for procedures and specifications. If a critical problem appears, repair it before riding rather than turning the highway into a test bench.

Sources and further reading

Motorcycle Safety Foundation — T-CLOCS official checklist.

Published by Biker Free Press. Editorial information current to the stated publication date; verify changing regulations, product specifications and event details with primary sources.


Return to the Newsroom · Send a correction or story tip