NEW / BIKER FREE PRESS MOTORCYCLE PERFORMANCE DESK
HARLEY PERFORMANCE
THE GARAGE
REAL PARTS. REAL FITMENT. PERFORMANCE YOU CAN ACTUALLY EXPLAIN.
Research-backed coverage of Harley-Davidson engine upgrades, Milwaukee-Eight camshafts, tuning systems, intake and exhaust, suspension and chassis components. We investigate the claims, the engineering tradeoffs and what the complete installation really entails.
EXPLORE THE PERFORMANCE FILES ↗ ALL GEAR & REVIEWS
Illustrative original-archive Harley-Davidson engine photograph; see photo credits. Product images and technical manuals are linked in each maker’s research file.
WHY WE BUILT THIS DESK
A Harley Parts Review Should Tell You More Than a Horsepower Number.
A camshaft or performance exhaust is not automatically better because it is louder, more expensive or accompanied by the biggest peak graph. An honest performance review starts with the motorcycle: engine generation, model year, intended rpm range, two-up touring load, compatibility with other parts, maintenance demands and local street-use rules. Then it examines what the manufacturer actually claims and what a repeatable independent test demonstrates.
Biker Free Press will give independent aftermarket makers space to explain their engineering while scrutinizing their claims. These initial reports are researched manufacturer-document profiles, **not** parts installed or dyno-tested by our newsroom. Where a company supplied a number, we identify the source rather than assigning our own score.
EXPLORE THE WORKSHOP
Find the System You’re Building
ECU Tuners & Engine Management / Aftermarket Exhaust Systems / Ignition, Coils, Plugs & Timing / Handlebars, Risers & Control Lines / Steering Dampers & Chassis Stability / LED Lighting & Auxiliary Driving Lamps / Model-Year Fitment, Brakes & Drivetrain
MODEL-YEAR FITMENT TABLE / BUILD PLANNING CHECKLIST / TECHNICAL GLOSSARY
START WITH THE RIDER’S GOAL
WHAT ARE YOU TRYING TO IMPROVE?
01 / CAMSHAFTS / CAM CHEST
Choosing torque for your riding range
Torque delivery, rpm window, cam chest condition, oil pump and lifter decisions, engine family and dyno evidence
02 / TUNING & ENGINE MANAGEMENT
A calibrated engine, not a magic number
ECU generation, calibration data, air-fuel ratio, logging and clear street-use compliance questions
03 / INTAKE & EXHAUST
How airflow changes interact
Actual throttle body, intake geometry, header/collector design, noise, catalyst retention and tuning
04 / SUSPENSION & HANDLING
Setup is part of the upgrade
Correct spring rate, sag, shock travel, adjusters, two-up load and documented comparison routes
05 / BRAKES, CLUTCH & DRIVETRAIN
Braking, clutch & drivetrain upgrades
Brake system compatibility, pad/rotor combinations, clutch load, belt/chain components and correct service limits
NEW RESEARCH NOW AVAILABLE BELOW
06 / HIGH-OUTPUT ENGINE BUILDS
High-output engines, cylinders & cooling
Big-bore and higher-compression combinations, oiling and cooling, turbo/forced-induction complexity and durability
NOW COVERED IN THE COMPLETE LIBRARY
THIRTY-EIGHT ORIGINAL PRODUCT & TECHNICAL REPORTS
FROM THE PERFORMANCE GARAGE
Every file includes the manufacturer’s official information, compatibility questions, installation and maintenance considerations, limitations of the available evidence, and what a legitimate independent test would need to measure.
POWER / RESPONSE / CORRECTLY MATCHED PARTS
Engine, Airflow & Electronics
ENGINE / CAMSHAFT
S&S Cycle 475 Cam
Published 2,200–5,200 rpm focus, chain/gear drive decisions and how to interpret a before-and-after torque curve.
ENGINE / CAMSHAFT
Feuling Reaper 465
Specific grind specifications, street-legal variant questions, cam-chest package choices and M8 generation exclusions.
EFI / TUNING
Dynojet Power Vision 4
ECU compatibility, Gen 2 Milwaukee-Eight support, map validation, wideband accessories and emissions limits.
AIRFLOW / INTAKE
S&S Stealth Air Cleaner
Throttle-body and year-specific fitment, excluded CVO variants and how to evaluate claimed intake gains.
EXHAUST / 2-INTO-1
Vance & Hines Pro Pipe
Collector and catalyst design, application matching, torque-curve questions and noise/emissions checks.
ROAD FEEL / CORRECT SPRINGS / ADJUSTABILITY
Suspension & Touring Control
TOURING / REAR SHOCKS
Legend REVO-ARC
Independent compression and rebound settings, reservoir placement, spring selection and shock-length decisions.
TOURING / REAR SHOCKS
Öhlins STX36
STX Classic versus STX Pro, specific part numbers, ride height and choosing adjustable damping for your load.
DYNO / CLAIM VERIFICATION / HONEST COSTS
Measure Before You Believe
TESTING / HOW-TO
How to Read a Harley Dyno Chart
Rear-wheel vs crank power, baseline conditions, torque curves, installed costs and how to spot weak evidence.
START HERE / DON’T BUY THE WRONG PART
HARLEY ENGINE & FITMENT REFERENCE
These broad families are an orientation guide, not a final part-approval list. Determine the exact VIN, model designation, factory engine, cooling system, existing modifications and current maker part number before ordering. Verify year-specific documentation for any safety-critical or emissions-related work.
1999–2006 Twin Cam
Why fitment differs
Early Twin Cam variants; certain 2006 Dyna models are treated differently by suppliers
Owner’s next check
Do not buy based on year alone; confirm cam drive and model-specific hardware
2006 Dyna / 2007–2017 Twin Cam
Why fitment differs
Changed application groupings in S&S and Feuling catalogs
Owner’s next check
Verify correct drive, balanced/non-balanced engine and current installation sheet
Evolution XL Sportster
Why fitment differs
883 and 1200 engines with generation-specific heads and cylinders
Owner’s next check
For 1250/1275, confirm cylinder fin style and 883/1200 head combination
Non-VVT Milwaukee-Eight
Why fitment differs
Air/oil, Twin-Cooled and center-cooled variants, different Touring and Softail chassis
Owner’s next check
Select by engine/cooling/ECU and actual SKU, not the vague label 2017-up M8
Newer VVT / CVO platforms
Why fitment differs
VVT 121 and newer variants can differ in cam drive, cooling and electronics
Owner’s next check
Treat VVT/CVO as a separate fitment check; never assume old M8 upgrades transfer
CAMSHAFT COMPARISON / PUBLISHED MAKER DESIGN INTENT
CHOOSE THE RPM RANGE, NOT JUST A NUMBER
The table summarizes manufacturer descriptions and is not an independent dyno ranking. It does not mean all named camshafts fit every engine in the displayed range. Compression, exhaust, valve train, displacement, ECU mapping and street approval must still be matched.
S&S 475
Published application context
107–135ci (design guidance); up to about 11:1 compression
Intent / RPM
Approx. 2,200–5,200 rpm
Decision point
Broad road and touring power emphasis; verify actual combination
S&S 496
Published application context
114–135ci (design guidance)
Intent / RPM
Approx. 2,300–6,000 rpm
Decision point
More upper-range emphasis; actual gains depend on heads and exhaust
Feuling Reaper 465
Published application context
Selected non-VVT M8 SKUs only
Intent / RPM
Maker describes road-focused response; exact curve varies
Decision point
Part-number-specific lift, supporting hardware and street approval
S&S 585 / Feuling 574
Published application context
Twin Cam, with different early/late part applications
Intent / RPM
Combination-dependent
Decision point
Older-engine cam drives and valve train must be verified
Primary maker details: S&S cam specifications and Feuling technical catalog.
BUILD BY PERFORMANCE GOAL
MATCH THE UPGRADE TO THE PROBLEM
Start with a mechanical inspection and baseline. Performance is a combination of reliable output, road behavior, braking and rider comfort. The matrix below helps organize the right questions rather than turning the Garage into an uncritical parts catalog.
Cams and engine
Typical rider goal
Torque improvement at realistic highway rpm
Evidence to request
Dyno curve, compression, heat, supporting parts
Warning sign
Anecdotal peak horsepower without complete setup
Intake and exhaust
Typical rider goal
Airflow/response and acceptable sound
Evidence to request
Exact fitment, emissions/noise approvals, fuel calibration
Warning sign
Loud pipes claimed as automatic horsepower
Suspension
Typical rider goal
Comfort, traction, reduced bottoming
Evidence to request
Sag, springs, compression/rebound, travel and load
Warning sign
Premium brand name without spring/setup information
Clutch/drivetrain
Typical rider goal
Transmit more torque predictably
Evidence to request
Slip diagnosis, friction/pressure system, clutch feel
Warning sign
‘More plates’ presented as universal solution
Brakes and tires
Typical rider goal
More predictable road control
Evidence to request
Correct ratings, rotor/ABS compatibility, measured stops
Warning sign
Stopping-distance claims without same-tire test conditions
NEW / TWELVE ADDITIONAL DETAILED GUIDES
THE FULL PERFORMANCE LIBRARY
We have expanded beyond the first eight maker-specific reviews to include technical setup, older engine families and the parts that make a complete motorcycle work. These articles cover the practical questions a rider should ask a shop before handing over the keys.
ENGINE FITMENT
Harley Engine Generations & Fitment
M8 versus Twin Cam and Evolution Sportster; cooling and VVT exclusions; chassis year differences.
CAMSHAFT COMPARISON
S&S 475 versus 496
Manufacturer powerband guidance, displacement requirements and why a heavy bagger needs a whole torque curve.
CAM CHEST / OILING
Inside the Milwaukee-Eight Cam Chest
Oiling, camplate, lifters, crankshaft runout, sealing and quote questions before work begins.
CRATE ENGINE
Screamin’ Eagle 135ci Stage IV
Official crate-engine package, cooling-specific versions, matched parts and total installed cost.
TWIN CAM
S&S 585 versus Feuling 574
Early and later Twin Cam application differences, drive arrangements, supporting valve train and torque expectations.
EVOLUTION SPORTSTER
HAMMER 883-to-1275 Conversion
Cylinder/head compatibility, compression, fueling, engine inspection and full conversion budget.
FRONT SUSPENSION
Progressive FST versus Race Tech
Monotube cartridges, Gold Valve emulators, front-end setup and true fork servicing costs.
REAR SUSPENSION
Sag, Preload & Damping Setup
Loaded sag, spring rate, clicker setup and documenting solo/two-up settings.
CLUTCH / DRIVETRAIN
Barnett Scorpion versus Screamin’ Eagle
Extra-plate versus full clutch assemblies, application splits, slipping diagnosis and daily engagement.
BRAKES
Brake Pads, Rotors & ABS
Brembo compound choices, tire grip, brake system compatibility and reproducible stopping tests.
TIRES / HANDLING
Load Ratings and Tire Pressure
Michelin speed/load indexes, Harley-specific inflation, two-up loads and custom wheel limitations.
BUILD PLANNING
The True Cost of a Performance Build
Complete parts, labour, calibrations, dyno testing, legal checks, warranty and follow-up worksheet.
Browse the complete published article archive or jump back to the core manufacturer product files.
PRINTABLE-MINDED WORKSHOP REFERENCE / NO FABRICATED PRICES
THE TEN-POINT PERFORMANCE BUILD CHECKLIST
Use these ten categories when asking shops for quotes. An invoice is only comparable when you know the same scope, hardware, labor and tuning are included. No preset prices are shown because they vary with bike, supplier, region and time.
MOTORCYCLE ID
Questions that must be answered
Model code, VIN-confirmed year, factory engine, cooling/VVT and current non-stock components
RIDER GOAL
Questions that must be answered
Solo or two-up, typical rpm, loaded weight, touring conditions, specific handling or drivability complaint
PARTS LIST
Questions that must be answered
Manufacturer, exact SKU, current installation sheet, exclusions, supplied hardware and supporting components
HEALTH / BASELINE
Questions that must be answered
Existing compression, fault codes, lubrication and mechanical condition where relevant
INSTALLATION
Questions that must be answered
Qualified shop, necessary inspections, clearances, measured tolerances and components replaced
ECU / DYNO
Questions that must be answered
Calibration and testing plan, full rear-wheel torque curves, test conditions and actual component configuration
CHASSIS
Questions that must be answered
Tire size/pressure, suspension sag/damping, brake and ABS compatibility, safe load and travel
LEGAL
Questions that must be answered
Specific emissions/noise approvals, local road use, equipment compliance, applicable insurance conditions
COST
Questions that must be answered
Parts, labor, seals/fluids, taxes, shipping, dyno, setup, troubleshooting and contingency
AFTERCARE
Questions that must be answered
Warranty, break-in/service, future inspections, replacement parts, documenting changes
Need help understanding a shop quote? Read our complete build-cost and documentation guide.
TECH SPEAK / EXPLAINED FOR THE RIDER
PERFORMANCE TERMINOLOGY
Technical language can obscure rather than clarify a parts decision. These plain-language definitions help readers understand manufacturer sheets and mechanic quotes.
BOLT-IN CAM
A maker’s shorthand for a stated, compatible installation range; it does not remove the need for inspections, clearances or suitable calibration.
CAM DURATION
A measure of how long a valve is held open under a specified timing convention; duration numbers cannot be compared fairly if the measurement basis differs.
CAM LIFT
The valve-opening magnitude associated with a cam profile; greater lift alone does not guarantee more street torque.
LIFTER
Valve-train component that follows the cam profile; wear and geometry are part of cam-chest evaluation.
CAMPLATE
Engine component supporting the cam and associated oiling/drive hardware; upgrade kits can include different assemblies.
CRANK RUNOUT
Measured deviation of the rotating crank axis from ideal; relevant for specific gear-driven cam conversions.
CRANK VS WHEEL POWER
Engine output and output measured at the driven wheel; not interchangeable numbers.
SAE-CORRECTED DYNO
Power normalized under a specified method and test conditions; correction and dyno type should be disclosed.
TORQUE CURVE
Output across engine rpm; more informative for riding behavior than a single peak number.
SPRING PRELOAD
Initial spring compression setting; can adjust loaded sag but does not change the actual spring rate.
COMPRESSION DAMPING
Hydraulic resistance when suspension compresses; requires setting matched to spring, load and intended use.
REBOUND DAMPING
Hydraulic resistance on return from compression; excessive or insufficient rebound affects bump recovery.
UNSPRUNG MASS
Wheels, tires and other components moving with suspension; changes can influence response and chassis feel.
CARB EXECUTIVE ORDER
An application-specific California emissions-related aftermarket approval; must match the part and vehicle, not merely the brand.
RACE-ONLY COMPONENT
A marketing/regulatory classification that does not automatically authorize use on public roads.
RIDERS ASK / WE CHECK THE DOCUMENTS
HARLEY PERFORMANCE FREQUENTLY ASKED QUESTIONS
Should I do exhaust or cam first?
Inspect the existing motorcycle, then select a coordinated legal engine package and calibration to meet a defined torque goal. A louder exhaust is not evidence of a power increase; a cam that needs an incompatible exhaust can also disappoint.
Is the 475 cam always better than the 465?
No. They are different grinds from different makers with distinct documentation and likely powerband intent. The proper decision depends on year, engine, compression, cooling/VVT status, exhaust and measured goals.
Can a cam ‘bolt in’ without a dyno tune?
Bolt-in describes certain mechanical fitment claims, not universal ECU calibration. The final fuel/ignition setup must suit the complete combination and remain legal. Ask the installation shop what verification is required.
Do I need gear-drive cams?
Not automatically. Verify crank runout against the exact kit specification and ask the builder what benefit the alternative drive brings to that engine.
Can I fit standard M8 parts to a VVT CVO?
Do not assume so. Newer VVT and CVO models may differ in cooling, cam drive, cylinder heads and electronics. Use explicit part-number and VIN-confirmed approval.
Why are my expensive shocks still harsh?
Possible causes include incorrect spring rate, too much damping, unsuitable sag, tire problems, too little travel or worn chassis components. Diagnose rather than simply adding preload or buying another shock.
Are all 2-into-1 exhausts street legal?
No. Catalyst presence, noise limits and application-specific emissions approval matter. A competition label does not override road-use law.
Can a shop promise a horsepower gain?
A shop can give a documented estimate based on similar tested builds, but your bike needs baseline/final measurement to verify the actual result. State whether power is crank or wheel and identify all other changed parts.
Is a stronger clutch always needed for a cam?
No. The need depends on actual engine output, clutch health, operating conditions and what the factory components can handle. Diagnose slip first.
What makes an independent performance review trustworthy?
Exact parts and vehicle, disclosed compensation or supplied equipment, original maker sources, baseline and matched test conditions, complete torque curves, safety/legal caveats and clear distinction between research and actual testing.
PRIMARY SOURCES / RESEARCHED NOVEMBER 17, 2026
WHERE OUR TECHNICAL CLAIMS COME FROM
Our reporting starts with engineering and installation information from the actual manufacturer. Independent measurements, when available in future tests, will be labeled separately. Manufacturer marketing figures are never disguised as our own dyno results.
- S&S Cycle: camshaft operating windows
- Feuling: Milwaukee-Eight cam-chest instructions
- Harley-Davidson: CVO engine generations
- HAMMER PERFORMANCE: Sportster kit compatibility
- Legend: REVO-ARC damping adjustment
- Race Tech: Harley fork kit technologies
- Progressive: Touring FST fork kit
- Barnett: Milwaukee-Eight clutch packages
- Brembo: road-oriented brake pad compounds
- Michelin: tire load and speed ratings
- EPA: tampering and defeat device rules
A RIDER’S TECHNICAL REFERENCE
Model-Year Fitment Matters More Than the Badge
A 2017 Milwaukee-Eight Touring, a 2018 Softail, a 2024 CVO 121 VVT and an older carbureted Twin Cam are not interchangeable platforms. Use this as a high-level research map—not a replacement for the official current parts lookup for the exact VIN.
1999–2006 carbureted Twin Cam 88
Important distinction
Separate legacy ignition modules, with TC88 versus TC88A connector differences
What the owner must check
Check existing module/connector, coil and data-bus arrangement; not Milwaukee-Eight parts
Read more
Daytona Twin Tec TC88 research
2017-up Milwaukee-Eight Touring (early generation)
Important distinction
Milwaukee-Eight engine and Touring-specific chassis; engine/ECU variants changed over time
What the owner must check
Cam, cam chest, intake, exhaust and controller must match precise year and cooling arrangement
Read more
S&S 475, Feuling 465 and Stealth intake research
2018-up Milwaukee-Eight Softail
Important distinction
Softail chassis/engine packaging and distinct exhaust/shock applications
What the owner must check
A Touring rear shock or pipe does not automatically fit a Softail; check exact code
Read more
M8 fitment master guide
2023.5/2024-up updated Touring electronics
Important distinction
Newer G26 / Gen 2 ECU on supported models; changing software support
What the owner must check
Check modern ECU unlock/tuner variant, firmware, CVO and valvetrain exclusions
Read more
FP4 vs PV4 vs ThunderMax comparison
CVO 121 VVT versus 121 High Output
Important distinction
Some versions use variable-valve timing; others do not share those mechanics
What the owner must check
Camshaft and tune compatibility must be verified by exact engine variant
Read more
2017–2026 fitment guide
2025–2026 Softail controls and lighting
Important distinction
Revised electronics, factory equipment and connectors on specified models
What the owner must check
Different LED harnesses/adapters and approved lenses may be required
Read more
Custom Dynamics ProBEAM review
1990s–2017 Dyna / FXR chassis examples
Important distinction
Steering mounting, bar controls and suspension differ from later Softail models
What the owner must check
Check riser/bar configuration, frame bracket, year and Wide Glide exclusions
Read more
GPR and Storz stabilizer guides
Tuning Products Compared
These categories are not equivalent software solutions. There are application-specific exceptions and current regional requirements; links to the deeper comparison and maker documents appear in the research files.
Vance & Hines FP4
How it works
Flashes a supported factory ECU through app workflow
Typical manufacturer application
Maker lists 2007–2023 applications
Critical buying question
Tune-map approval, model-year compatibility, road legality
Dynojet Power Vision 4
How it works
Flashes supported factory ECU; multiple product/firmware versions
Typical manufacturer application
Includes distinct support for 2023.5+ Gen 2 G26 variants
Critical buying question
Exact product SKU, software, unlock/licensing, diagnostic logs
ThunderMax AutoTune
How it works
Replacement aftermarket ECM with wideband sensor feedback
Typical manufacturer application
Sold in distinct model-year/engine families including 2025-up Softail variants
Critical buying question
Street legality, harness, ECU features, base-map selection and sensor installation
Exhaust Architecture Compared
The complete engine combination determines real results, not the number of exhaust outlets. A microphone or dyno test is useful only when its method is documented.
Slip-on mufflers
What is changed
Changes downstream muffler section on compatible stock or aftermarket head pipe
Product example
TAB B.A.M. Sticks; Rinehart HP45/MotoPro45
Evidence to request
Useful for sound/packaging changes; cannot presume major power gain
Complete 2-into-1
What is changed
Replaces header/collector and muffler on a defined platform
Product example
Vance & Hines Pro Pipe Touring
Evidence to request
Evaluate collector, catalyst, tuning and useful torque curve
Complete 2-into-2
What is changed
Separate cylinder exhaust paths in the full system
Product example
System architecture, not an endorsed product here
Evidence to request
Evaluate cylinder-specific tuning, sound and matched engine build
THE BUILD WORKSHEET
12 Things to Document Before Spending Money
An impressive list of premium components can still be a poor build when none of them work together. Use these questions for a conversation with a qualified motorcycle shop, especially before costly cam-chest, electrical, braking or suspension work.
01
Motorcycle identity
Record actual model code, VIN-decoded year, chassis and original engine variant; avoid publishing full private VIN
02
Engine baseline
Compression/leakdown where relevant, service history, oil system, mechanical condition and existing engine error codes
03
Build purpose
Two-up touring torque, high-rpm performance, engine longevity, ride handling, night visibility or appearance
04
Existing modifications
Document current intake, exhaust, cams, ECU version, final drive, brake, tire and suspension parts
05
Manufacturer part numbers
Match every new component to official current-year fitment and installation sheet
06
Interaction between products
Check tune and exhaust, cam and valve springs, air intake and throttle body, bars and lines, wheel size and ABS
07
Road and emissions compliance
Find application-specific CARB/EPA or other approval evidence; confirm provincial/state noise and safety requirements
08
Installed total cost
Parts, shop labour, diagnostics, tuning, dyno time, lines, special hardware, service and warranties
09
Pre/post measurements
Baseline and repeat dyno conditions, torque curve, brake testing or suspension sag settings as appropriate
10
Electrical load
Check charging-system capacity and all added accessories and controllers
11
Serviceability
Can the parts be maintained and spares purchased? Who will service the bike in another province or state?
12
Disclosure of results
Distinguish maker statements, independent dyno data, subjective ride feedback and limitations
THE PERFORMANCE VOCABULARY
Twenty Terms Every Harley Builder Should Know
Use these definitions to interpret product listings and technical discussions. They are simplified explanations rather than repair instructions or a substitute for a component’s full specification.
ECU/ECM
Meaning when choosing a part
The electronic module that manages engine operation; capabilities vary by generation.
G26 / Gen 2
Meaning when choosing a part
A newer Harley ECU family used on certain 2023.5-on motorcycles; requires specifically supported tuning tools.
VVT
Meaning when choosing a part
Variable valve timing, present on certain CVO configurations; alters cam and calibration compatibility.
AFR
Meaning when choosing a part
Air-fuel ratio. Logged values are useful but do not alone guarantee correct ignition or engine health.
Wideband sensor
Meaning when choosing a part
A sensor used to monitor a wider oxygen/fuel-mixture range for suitable calibration strategies.
Closed-loop correction
Meaning when choosing a part
Fuel feedback strategy responding to sensor measurements; not an automatic guarantee of perfect tune.
Torque curve
Meaning when choosing a part
Output plotted over engine speed. Useful for comparing real riding rpm, not just peak numbers.
Rear-wheel horsepower
Meaning when choosing a part
Output measured at the driven wheel, generally distinct from maker crankshaft ratings.
Cam duration and lift
Meaning when choosing a part
Valve-event timing and valve opening dimensions; not sufficient alone to predict total engine output.
2-Into-1 collector
Meaning when choosing a part
Exhaust architecture combining two cylinders into one downstream pipe with specific pressure-wave interactions.
Preload
Meaning when choosing a part
Spring compression setting used in suspension setup, commonly adjusted to achieve appropriate ride sag.
Compression damping
Meaning when choosing a part
Resistance to the suspension moving inward over bumps or load changes.
Rebound damping
Meaning when choosing a part
Resistance controlling the return of a suspension after it compresses.
Sag
Meaning when choosing a part
Suspension compression under bike/rider/passenger load, used to guide correct setup.
Steering damper
Meaning when choosing a part
Hydraulic device resisting certain steering oscillations; not a repair for loose bearings.
TBW
Meaning when choosing a part
Throttle-by-wire electronic grip system; handlebar fit differs from mechanical throttle cables.
CAN/BCM
Meaning when choosing a part
Vehicle network and body control module that may govern signals and other electrical functions.
CARB Executive Order
Meaning when choosing a part
An application-specific exemption/approval document; check exact year, part and conditions.
DOT/SAE lighting marks
Meaning when choosing a part
Approval-related references that must be matched to the actual lamp assembly and jurisdiction.
Sintered brake pad
Meaning when choosing a part
A friction-material category; performance depends on compound, rotor and working temperature.
BFP TESTING POLICY
WHAT OUR FUTURE TESTS WILL DISCLOSE
- Exact Harley model, engine generation, displacement, year, original configuration and tested parts.
- Who supplied or paid for the product, installation and test session.
- Measured starting condition, exhaust/intake/calibration changes and relevant dyno correction factors.
- Complete torque curves at the rear wheel, not only the largest horsepower figure.
- Handling results with spring and damping settings, load, tire pressure and repeated riding conditions.
- Street-use, noise and emissions information based on the actual part number and jurisdiction.
- Longer-term reliability and warranty findings only when real follow-up data exists.
Do not treat a catalog claim as proof of a dyno result on your bike. We have not personally tested the products featured here. All articles link to their original manufacturer documentation.
