THE INDEPENDENT VOICE OF MOTORCYCLE CULTURE

NEWS / RIDES / GEAR / FREEDOM

,

Twin Cam Performance Revisited: S&S 585 and Feuling Reaper 574 Camshaft Fitment

Real Harley-Davidson motorcycle outdoors

HARLEY PERFORMANCE GARAGE / ENGINE & POWER TECHNICAL FILE / NOVEMBER 2026

Harley performance did not begin with the Milwaukee-Eight. Many well-maintained Twin Cam motorcycles remain regular touring and custom builds, and S&S and Feuling continue to document camshafts and installation packages for their distinct year ranges. The goal is to identify a suitable powerband without confusing early- and late-generation Twin Cam parts.

Two familiar cam families, not the same part

S&S’s current cam overview describes the 585 as intended for certain 88–95 cubic-inch engines with roughly 9.7:1–10.5:1 compression and larger 100–124 cubic-inch combinations with different compression assumptions. It identifies specific cam timing and valve-lift information in the published table. The description should be matched to the full build rather than sold as a universally stock-friendly grind.

Feuling catalogs the Reaper 574 family across distinct chain/gear-drive and engine-year combinations. For example, SKU 1002 covers a 1999–2006 chain-drive application excluding the 2006 Dyna, while another listing covers 2007–2017 versions. Neither is a substitute for the correct specific application.

Why 2006 Dyna is a warning flag

The difference between a 2006 Dyna and other 2006-era Twin Cam products appears in multiple official aftermarket fitment descriptions. Anyone shopping by calendar year rather than engine and model code risks choosing the wrong cam-drive assembly or related hardware.

Even where parts are marketed for 2007–2017 Touring, a balanced Softail installation or special factory engine can introduce other requirements. The supplier’s latest part-selector result and install sheet must resolve them.

What an effective Twin Cam build should address

The discussion should include baseline compression, heads and valve springs, lifters, cam-chain tensioners or drive components, oiling status, intake and exhaust configuration, and the desired rpm range. A cam with a strong upper-rpm profile may disappoint someone who rides loaded at low rpm unless the complete engine supports it.

Builders should explain the expected torque curve and the mechanical reason for every extra item in the quote.

Evidence matters as much as brand reputation

An online graph showing a Twin Cam at 115 horsepower may have included pistons, head porting, exhaust and custom mapping in addition to camshafts. That does not establish what another bike will gain from the cam alone. Ask for a comparable baseline and total setup.

These are researched maker specifications; BfP has not installed or road-tested either cam.

A useful future test

The strongest independent comparison would include two similarly configured engines, complete tune and part lists, multiple controlled dyno pulls, vibration/heat observations and follow-up reliability checks over meaningful mileage. Until that is possible, the manufacturer’s specification should be presented as exactly that.

Owner’s research checklist

  • Confirm model and exact Twin Cam production variant
  • Use current S&S/Feuling year range and exclusion lists
  • Check valvetrain, oiling and drive hardware in the quote
  • Measure baseline compression and drivability before modifications
  • Review dyno graphs for identical supporting hardware

Official reference documents

S&S Cycle cam technical overview

Feuling 574 Reaper early Twin Cam SKU 1002

Feuling 574 Reaper later Twin Cam SKU 1009

Feuling Twin Cam installation and cam technical chart

Biker Free Press technical research, November 17, 2026. This is a manufacturer-document evaluation, not a physical engine inspection, installation or dyno test. Illustrative motorcycle photographs are credited in our site photo credits. Follow exact year/model instructions and qualified technicians. U.S. federal emissions-control tampering and defeat devices are prohibited; road-use approval must be verified for the specific part and bike.


Return to the Newsroom · Send a correction or story tip