HARLEY PERFORMANCE GARAGE / HANDLEBARS / CONTROL EXTENSIONS / 17 NOV 2026
A tall Harley handlebar conversion is only as good as the lines and cables attached to it. Burly Brand sells application-specific kits intended to make selected Dyna ape-hanger installations less of a collection of mismatched parts. The right kit depends on far more than the height stamped on the handlebars.
Research-only profile: manufacturer documents reviewed. BfP has not physically tested or installed this product; the featured motorcycle image is illustrative.
What is in the Dyna kits
Burly describes 12-, 14- and 16-inch ape-hanger cable/line kits for specified Dyna models. Packages may include throttle cables, a clutch cable, brake line and colour-matched wiring extensions tailored to the chosen year and equipment. It also offers separate T-bar packages. The product SKU, ABS status and disc configuration control what is actually included.
Fitment is not universal
Earlier cable-controlled bikes and later electronically operated controls use different systems. An older Dyna kit cannot automatically be installed on a newer Softail simply because both have a V-twin. ABS line routing and proper hydraulic service can change installation requirements. Always inspect the actual motorcycle and manufacturer’s application chart.
How to measure a conversion
Measure the combined bars, risers, pullback and locations of the existing controls. Work through full steering lock in both directions and suspension movement. The installation cannot place a brake hose under tension, create binding throttle travel or pinch switch wires. Professional hydraulic service and functional checks are necessary.
The cost and legality decision
A conversion budget should include the handlebars, clamps, cables, hoses, fittings, shop labour and any follow-up inspection. Provincial or state bar-height and control-operation rules may apply. BfP has not fitted or pressure-tested these products and does not make a claim of universal legal fitment.
Technical buying checklist
- Confirm year, trim, brake layout and ABS status.
- Measure bar-and-riser geometry rather than rise alone.
- Review throttle/clutch system type and brake-line hardware.
- Inspect full-lock clearances and all safety controls.
- Budget parts and professional installation together.
Source documentation
Safety-critical controls and steering must be installed and inspected using model-specific service procedures. Review applicable provincial or state laws. Photographs are credited in the BfP photo credits.

