THE INDEPENDENT VOICE OF MOTORCYCLE CULTURE

NEWS / RIDES / GEAR / FREEDOM

,

Öhlins STX36 for Harley-Davidson: Touring Shock Levels and Spring-Rate Decisions

Real Harley-Davidson motorcycle outdoors

HARLEY PERFORMANCE GARAGE / RESEARCH FILE / NOVEMBER 17, 2026

Öhlins offers more than one Harley-Davidson rear shock under the STX36 name, making the choice confusing if buyers stop at brand recognition. The STX Classic and STX Pro differ in architecture, adjustability and intended load and use cases. Buying the right component means reading its exact HD part number and fitting sheet.

Research status: This is a product/technical evaluation based on the maker’s official specification or installation guidance, not an independently measured BfP test. The photograph is representative licensed motorcycle imagery and does not depict the named aftermarket part.

STX36 does not mean one identical shock

Öhlins’ HD 775 STX Classic listing describes a 12-inch, 36-mm-piston, nitrogen-charged emulsion twin shock with spring-preload adjustment and serviceable construction for specified FL Touring motorcycles. The product is sold as a pair.

By contrast, the HD 779 STX Pro Blackline application for relevant later Street Glide and other bagger models lists separate rebound and compression damping adjustments, an external reservoir, selectable spring rates and slight ride-height adjustability. These are different pieces of hardware intended for different budgets and rider requirements.

Shock length and setup change the ride

Öhlins publishes lengths and spring-rate options, plus model-specific setup sheets. A shock should be selected against the actual Touring year, load and geometry. A 12-inch unit and a 13-inch unit are not interchangeable just because they share a design family name.

Spring rate, travel and total suspension setup determine whether a ride feels planted or harsh. Damping adjustments cannot cure an incorrect spring for two-up use.

What to examine before paying

Ask the supplier for the complete part number, included brackets, spring choices, preload tool, whether the package fits under your saddlebags and what servicing options exist locally. A touring rider carrying a Tour-Pak or passenger should discuss total weight with the suspension specialist.

If your bike has other chassis upgrades, tire-size changes or a lowering kit, confirm that the combination retains proper travel and clearances.

A meaningful independent comparison

A fair test would use repeatable sections of road, the same tire and load conditions, recorded settings, measurements of sag and rider feedback. Without those, ‘plusher’ or ‘more stable’ remains a maker’s design claim. BfP has not physically tested the STX36 family.

Before buying or installing

  • Identify whether HD 775, HD 779 or another specific SKU is needed.
  • Verify intended chassis generation and shock length.
  • Select spring rate for actual riding load.
  • Compare which adjustments exist on each STX level.
  • Confirm service/parts support and safe installation clearances.

Fitment, law and transparency

Before ordering or installing performance parts, check the exact motorcycle VIN, engine family, model year, throttle body, fuel system, CVO/VVT status and all manufacturer exclusions. Emissions and noise laws vary by jurisdiction. In the United States, EPA prohibits unlawful emissions-control tampering and aftermarket defeat devices; ‘for race use’ packaging is not a blanket legal exemption for street motorcycles. Canadian provincial and federal requirements need separate checking.

Original manufacturer and reference sources

Öhlins — HD 775 STX Classic specification

Öhlins — HD 779 STX Pro model-specific listing

Manufacturer documents checked November 17, 2026. Product versions, current availability, technical exclusions, warranty coverage and regional regulations can change. Photo: licensed illustrative archival motorcycle imagery; full attribution is in the BfP photo credits.


Return to the Newsroom · Send a correction or story tip